I/O Interconnect SV141D0, Руководство пользователя

Страница: 17 / 27

Ioint® Secure DVI 4K KVM Switch User Manual
ƒ‰‡ͳ͸
Operating the KVM Switch
S electing a Computer U sing Port S electors
Self-Test Procedure:
As product powers-up it performs a self-test procedure . In case of
self- test failure for any reason, including jammed buttons, the product
will be Inoperable . Self-test failure will be indicated by the following
abnormal LED behavior:
 All channel-select LEDs will be turned ON and then OFF;

A specific, predefined LED combination will be turned ON;

The predefined LED combination will indicate the problem
type (jammed buttons, firmware integrity).
Try to power cycle product . If problem persists please contact your system
administrator or technical support. Now that product, computers and
peripherals are connected and powered up, it is ready for use.
Now that you have connected your console and computers to the Switch, it
is ready for use . You can select which computer you wish to control by
pressing the corresponding port selector on the front of the Switch . The
LED number will illuminate to indicate which computer (or port) is
currently selected . It may take approximately 1 second for the video signal
to sync after switching ports . This is normal behavior and is dependent on
the display connected . This is normal operation and ensures that proper
synchronization is established between the monitor and the connected
computers.
Keyboard and mouse inputs can only be sent to the selected computer,
and video outputs can only be received from the selected computer . The
Switch also prevents any data transfer between connected computers,
ensuring the security of your computers.
Please note that the default port at power-up is port 1 . In case of a power
failure or if the power is cycled, the Switch will default to port 1.