Getting Started
Prior to connecting video and audio to the I-O
PRO
|
EDGE
®
VSR, network connectivity
must be configured and the streaming and/or recording profiles must be created.
1. Plug a network cable into the VSR's RJ45 Network Port on the back of the VSR.
2. Plug the power adapter into the back of the VSR
3. Power on the VSR by pressing the silver power button on the front of the VSR. A
blue LED light will illuminate the power button. Should a blue LED not illuminate,
check all power connectivity.
After the unit is booted and operational, the front LCD Panel will appear as shown in
LCD Figure 001 below.
LCD Figure 001
After making note of the IP Address, press the green check button to view the Main
Menu:
LCD Figure 002
5
