Connecting Video and Audio
Prior to streaming and/or recording, one must connect an active video and audio
source.
VIDEO:
The VSR has 3 composite video inputs and 1 s-video input. Each can be used,
though not simultaneously. The VSR software is setup only to stream and record from
one of the four inputs at a time. The port that is used is determined by the “Video Input”
option selected when creating a profile in the Profile Manager.
With the current version Windows Media Encoder and the VSR Software, switching
between different inputs during an encoding session is not possible.
When creating a profile in the Profile Manager, the default video connection is the
Composite 1 input port.
AUDIO:
When connecting the audio source to the VSR, use the blue “Audio Line IN”
port. This is the port typically used when receiving an audio feed from an external
source.
IMPORTANT: To prevent damage to the internal audio components on the
motherboard, DO NOT plug an amplified signal into the VSR Audio Line In Port.
As with any PC device, plugging an amplified signal into a standard PC Line in
Port will cause damage. I-O Corporation strongly recommends utilizing an
external audio mixer and then feeding the audio signal into the blue “Audio Line
IN” port.
12
