EMS i-MO 210 C Series Hardware Installation Guide
Version
1.0
ELECTRONIC MEDIA SERVICES LIMITED
1st Floor, Building 51, Whitehill & Bordon Enterprise Park, Budds Lane, Bordon, Hampshire, GU35 0FJ
Tel:
01428 751655 |
Fax:
01428 751654 |
E-mail:
Page
4
of
16
General Safety Guidelines for EMS Hardware Equipment
The following guidelines help ensure your safety and protect the hardware equipment from damage. The list
of guidelines might not address all potentially hazardous situations in your working environment, so be alert
and exercise good judgment at all times.
•
Perform only the procedures explicitly described in this documentation. Make sure that only
authorized service personnel perform other system services.
•
Keep the area around the chassis clear and free from dust before, during, and after installation.
•
Keep tools away from areas where people could trip over them while walking.
•
Wear safety glasses if you are working under any conditions that could be hazardous to your eyes.
•
Do not perform any actions that create a potential hazard to people or make the equipment unsafe.
•
Never install or manipulate wiring during electrical storms.
•
Never install electrical jacks in wet locations unless the jacks are specifically designed for wet
environments.
•
Operate the hardware equipment only when the chassis is properly grounded.
•
Do not open or remove chassis covers or sheet metal parts unless instructions are provided in this
documentation. Such an action could cause severe electrical shock.
•
Do not push or force any objects through any opening in the chassis frame. Such an action could
result in electrical shock or fire.
•
Avoid spilling liquid onto the chassis or onto any hardware component. Such an action could cause
electrical shock or damage the hardware equipment.
•
Do not use the device where inflammables or explosives are stored, for example, in a fuel station, oil
depot, or chemical plant. Otherwise, explosions or fires may occur.
•
Use only the accessories supplied or authorized by the device manufacturer. Otherwise, the
performance of the device may get affected, the warranty for the device or the laws and regulations
related to telecommunications terminals may become null and void, or an injury may occur.
•
Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires may occur.
•
Do not use the antennas if the connectors, cables, or antennas are damaged. Otherwise, radio
frequency interference or electric shock may occur.
Installation Safety Guidelines and Warnings
Read the installation instructions before you connect the hardware equipment to a power source.
Operating Temperature Warning
To prevent the hardware equipment from overheating, do not operate it in an area that exceeds the
maximum recommended ambient temperature of 40°C. To prevent airflow restriction, allow at least 2 inches
of clearance around the device.
Do not expose to direct sunlight.
