background image

 

 

Warranty Certificate 

 

The warranty certificate is enclosed separately and to be valid must be completed fill and returned to Bluenote factory or the official 

distribution. In all countries where there is an official distribution network, the dealer must stamp the warranty certificate. In compliance with 

the laws in force, the dealer may modify the official Bluenote warranty certificate wholly or partially without notice and without further 

mention being made in this instruction manual.     

 

 

 

 

Customer Service 

 

All BLUENOTE  - I.A.V.®  products are the result of meticulous technological research, and consequently their correct functioning is 

guaranteed. In spite of this it is possible that problems may emerge which non-specialist users cannot resolve. In this case, contact your dealer 

who will advise you on how to resolve the problem.  

Do not return any object directly to the factory or to the national dist ributor or without being authorized to do so. In such cases both 

BLUENOTE - I.A.V.®  and the distribution agents operating within your territory decline responsibility of any kind.   

 

 

 

PS.  The photos reproduced here refer to the  Piccolo Turntable, but p arts and descriptions may vary from the product on sale without notice. 

 

 

 

 

 

 

Warnings 

1. 

 

Do not disassemble any part of the product.  

2. 

 

Do not use any part of the product for other purposes.    

3. 

 

For service and problems of any kind, contact qualified personnel. 

4. 

 

Protect the product from rain and humidity and keep away from heat sources, electric and electronic motors etc. 

 

 

 

 

 

 

Содержание Piccolo














Отзывы: