I.A.V. Piccolo, Руководство пользователя

Страница: 8 / 13

Operating conditions
Once you have connected the power supply cable to an AC current power plug as well as the cable supplied with the tonearm that you will
previously have installed and connected, your PICCOLO will be ready to use.
PLEASE NOTE: Check that the correct acceptance voltage is indicated on your turntable. Incorrect voltage will prevent your
PICCOLO from working properly and could risk causing irreparable damage .
WARNING: Never turn on the turntable while any parts are disassembled, as contact with the high voltage inside the
PICCOLO turntable could be fatal.
33 1/3 rpm or 45 rpm
By positioning the belt in the smaller groove of the synchronous pulley motor, the PICCOLO turntable be set at 33 1/3 rpm, while in the larger
groove it will be set at 45 rpm. This posit ioning must be carried out manually.
The pulley may be covered by a Jewellery Gold Plated cover available as optional.
Turning on
The On/Off switch is located on Acrylic board. Once the switch has been turned to ON (1) the turntable will start working at the speed hand
selectioned.
Specifications & Technical features
n
wow e flutter : 0,03
n
Rumble : -78 db
n
Speed : 33 1/3 and 45 RPM +/- 0,1% - rapid manual changeover
n
70 shores elasticity black drive belt
n
Dimensions: width 470 mm; depth 360 mm; height 130 mm.
Positioning – Operating - Specifications 6
Piccolo
Italian Prestige Rigid Turntable