Hyundai WS 2011 WIND, Инструкция по эксплуатации

Страница: 37 / 56

EN
EN - 37
• The trend pointer (LCD A7) indicates the trend of the barometric pressure.
indicates the barometric pressure trend is increasing.
indicates the barometric pressure trend is steady.
indicates the barometric pressure trend is decreasing.
Barometric Pressure Reading
• Press “Absolute/Relative” button (B10) to select Absolute or Relative pressure display. “Abs”
is shown for Absolute pressure; “Rel” is shown for Relative pressure.
• Absolute pressure is the actual pressure measured by the Main Unit.
• After Batteries inserted or holding “WEATHER” button (B10) for 3 seconds,and complete the
weather icon setting, the unit will go to Relative pressure setting mode. Press “ +“ (B11) or “-“
(B12) key to adjust, press “WEATHER” button (B10) to confirm. Check the Local Weather
Station for Sea Level pressure.
Barometric Pressure Trend Bar graph
• The Barometric Pressure Reading at –1hr,-2hr,-3hr,-6hr,-12hr,-24hr,-30hr is recorded
and shown on Barometric Pressure Bar Graph (A8). The Graph is displayed in both hPa
and inHg.
Thermometer
• Press “°C /°F” button (B11) to select Temperature to be displayed in Celsius mode
or Fahrenheit mode.
• If the temperature is out of the measurable range, LL.L (beyond the minimum temperature)
or HH.H (beyond the maximum temperature) will be shown on the LCD.
Maximum/Minimum Temperature/humidity recording function
• Press “MAX/MIN” button (B4) to show the maximum or minimum of indoor/outdoor
Temperature/Humidity.
“ MIN ” is shown on the LCD if maximum Temperature/Humidity is shown.
“ MAX ” is shown on the LCD if minimum Temperature/Humidity is shown.
• Hold “MAX/MIN” button (B4) for 3 seconds to clear the recorded outdoor maximum and mini -
mum reading.
Outdoor Thermo & humidity Sensor Unit Registration Procedure
• The main unit automatically starts receiving transmission from Outdoor Thermo&humidity
Sensor after Weather condition setting. Outdoor temperature digits (A2) blinks.
• Insert the batteries in the Thermo Sensor Unit. The sensor unit automatically transmits
temperature & humidity to the main unit.
• Press “TX“button (D9) on the thermo sensor unit to transmit temperature to the main unit
manually. The main unit gives a “beep” sound if it received the temperature.
EN