Hyundai WS 2011 WIND, Инструкция по эксплуатации

Страница: 38 / 56

EN - 38
Display Outdoor Temperature
• Hold “ CHANNEL” (B9) button for 3 seconds to cancel unused channel. It will automatically
register a new channel again if a new channel is received.
• If there is no temperature displayed (“- - . –“ is displayed on the LCD), hold “CHANNEL”
button (B9) for 3 seconds to cancel that channel and receive the channel again (“Beep” sound
can be heard.) Then, press “TX “button (D9) on the thermo sensor unit to transmit signal to
the main unit manually
• Press “°C/°F” button (D8), on the Sensor unit, to select Temperature to be displayed
in Celsius mode or Fahrenheit mode.
• Press “°C/°F” button (B11), on the main unit, to select Temperature to be displayed
in Celsius mode or Fahrenheit mode.
Wind speed
• Press “Wind Chill/Gust” (B2) button to select Wind Chill or Gust display.
• Hold “Wind Chill/Gust”(B2)button 3 second change the Wind unit.
m/s

knots

kmph

mph
Wind speed bar
• Wind speed bar display with 1-12 bft unit.
Radio Controlled Clock
• At 2 minutes after batteries inserted, the clock automatically starts scanning the DCF time
signal.
“ ” flashes indicate now is receiving DCF signal
“ ” turns on indicate signal received successfully
If reception fail, scanning stops (“ ” disappear on the LCD) and repeats again at next hour.
Totally four reception will be tried after starting. Each reception takes about 10 minutes.
• The clock automatically scans the time signal at 3.00 a.m. everyday to maintain accurate
timing. If reception fail, scanning stops (“ ” on the LCD disappear) and repeats again at
4.00 a.m. 5.00a.m. and 6.00a.m.
• The clock can be set to scans the time signal manually by holding “ ” button (B8) for
3 seconds. If receptions fail, scanning stops. (“ ” on the LCD disappear).
• Hold “ ” button (B8) for 3 seconds or enter Time Setting to stop scanning DCF time signal.
• Buttons will not function while scanning for DCF time signal unless they are well received or
stopped manually.
• “ DST ” shown on the LCD if it is in Daylight Saving Time Mode