Hyundai WS 2011 WIND, Инструкция по эксплуатации

Страница: 36 / 56

EN - 36
WIND SPEED WITh ThERMO SENSOR UNIT APPEARANCE
D1: Transmission Indication LED
D2: Outdoor Temperature
D3: Temperature Sensor Probe and Plug
D4: Wind Speed Sensor
D5: Wall Mount Hole
D6: Battery Door
D7: Battery Compartment
D8: ”°C/°F” button
D9: “TX” button
D10: Stand
Set Up
• Insert batteries.
• Use a pin to press the RESET (B13) button
Weather Forecast Function
• After Batteries inserted or holding “WEATHER” button (B10) for 3 seconds, Weather Icon (A4)
blinks. Enter the current weather condition by pressing “+“ (B11) or “-“ (B12) buttons. Press
“WEATHER” button (B10) to confirm the setting and then go to relative pressure setting ,input
the sea level’s pressure and press “WEATHER” button (B10) to complete the setting. The
weather forecast may not be accurate if the current weather condition entered is not correct.
• The current weather status should be entered again if the altitude of the weather station is
changed. (Barometric pressure is lower at higher altitude location. Therefore, altitude change
will affect the weather forecast) the weather station will start the first forecast at 6 hours after
the current weather status is entered.
• Totally 5 different weather conditions in the weather forecast.
means
Sunny
means slightly
Cloudy
means
Cloudy
means
Rainy
means Cloudburst
is shown if the weather forecast is
Rainy or Cloudburst and outdoor
temperature s under 0°C.
• If there is any inconsistency of weather forecast between Local Weather Station and this unit,
the Local Weather Station‘s forecast should prevail. We will not hold responsible for any
trouble that may come up due to wrong forecasting from this unit.