Hyundai Robex 130 SMART, Руководство оператора

Страница: 88 / 148

4-20
8. OPERATION IN THE SPECIAL WORK SITES
D11074OP01
50C
OPERATION THE MACHINE IN A COLD WEATHER 1)
OPERATION IN SANDY OR DUSTY WORK SITES
2)
Inspect air cleaner element frequently. Clean or
replace element more frequently, if warning lamp
comes ON and buzzer sounds simultaneously,
regardless of inspection period.
Replace the inner and outer element after 6
times of cleaning.
Inspect radiator frequently, and keep cooling fins
clean.
Prevent sand or dust from getting into fuel tank
and hydraulic tank during refilling.
Prevent sand or dust from penetrating into
hydraulic circuit by tightly closing breather cap of
hydraulic oil tank. Replace hydraulic oil filter and
air breather element frequently. Also, replace the
fuel filter frequently.
Keep all lubricated part, such as pins and
bushings, clean at all times.
If the air conditioner and heater filters clogged,
the heating or cooling capacity will drop. Clean
or replace the filter element more frequently.
Clean electrical components, especially the
starting motor and alternator to avoid
accumulation of dust.
Use proper engine oil and fuel for the weather.
Fill the required amount of antifreeze in the
coolant.
Refer to the starting engine in cold weather.
Start the engine and extend the warming up
operation.
Be sure to open the heater cock when using the
heater.
Always keep the battery completely charged.
Discharged batteries will freeze more easily
than fully charged.
Clean the machine and park on the wood plates. (1)
(2)
(3)
(4)
(5)
ö
(6)
(1)
ö
(2)
(3)
(4)
(5)
(6)
(7)