6-18
CHECK ENGINE OIL LEVEL
Check the oil level with the machine on a flat
ground before starting engine.
Pull out the dipstick and wipe with a clean cloth.
Check the oil level by inserting the dipstick
completely into the hole and pulling out again.
If oil level is LOW, add oil and then check again.
If the oil is contaminated or diluted, change
the oil regardless of the regular change
interval.
Check oil level after engine has been stopped
for 15 minutes.
Do not operate unless the oil level is in the
normal range.
Normal
Dipstick
Drain plug
Warm up the engine.
Turn the lever to open position.
A drain pan with a capacity of 11.5 liters
(3.04U.S. gallons) will be adequate.
Clean around the filter head, remove the filter
with a filter wrench and clean the gasket surface.
6. SERVICE INSTRUCTION
1)
(1)
(2)
(3)
D11076MI01
D11076MI02
D11076MI03
2)
(1)
(2)
(3)
REPLACEMENT OF ENGINE OIL AND OIL FILTER
Содержание Robex 130 SMART
Страница 1: ......
Страница 54: ...3 8 5 Diagnosis Protocol type 1 Error display Recorded error delete Display map Monitoring 2 a...
Страница 56: ...3 8 7 Display Operation skin a Brightness b Language c Dual mode Changing the MCU mode c...
Страница 148: ......