3-17
Perform the following procedure in order to open the upper windshield.
Release both latches(1) in order to release the upper windshield.
Hold both grips that are located at the bottom of the windshield
frame and at the top of the windshield frame push the windshield
upward.
Hold both grips that are provided on the windshield frame and back
into the storage position until auto lock latch(2) is engaged, move the
levers of both latches(1) into the locked position. Push the levers
toward the rear of the cab in order to hold the windshield in storage
position.
(1)
UPPER WINDSHIELD
14073CD70
Perform the following procedure in order to close the upper windshield.
Move the lever of the auto lock latch(2) in the direction of the arrow in
order to release the auto lock latch.
Reverse step
through step
in order to close the upper
windshield.
Latch 2
(2)
29073CD71
9)
1
2
6
3
4
5
7
REMOTE CONTROLLER
11)
Press to switch ON the set. Press for more than 2seconds to
switch OFF the set.
(1) Power ON/OFF button
4507A3CD81
Short press : Volume up one step
Long press : Volume up continuous
(2) Volume button(up)
4507A3CD82
Содержание Robex 130 SMART
Страница 1: ......
Страница 54: ...3 8 5 Diagnosis Protocol type 1 Error display Recorded error delete Display map Monitoring 2 a...
Страница 56: ...3 8 7 Display Operation skin a Brightness b Language c Dual mode Changing the MCU mode c...
Страница 148: ......