manualshive.com logo in svg

Hyundai i20 Active 2016, Руководство пользователя, Страница: 48 / 303

Поделиться
Скачать
Hyundai i20 Active 2016 Скачать руководство пользователя страница 48

 

"&$%'#%#$&'!"'%!'&&

IInstalling a child restraint system
by lap/shoulder belt

To install a child restraint system on
the outboard or center rear seats, do
the following:
1. Place the child restraint system in

the seat and route the lap/shoul-
der belt around or through the
restraint, following the restraint
manufacturer’s instructions. Be
sure the seat belt webbing is not
twisted.

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the dis-
tinct “click” sound.

Position the release button so that it
is easy to access in case of an emer-
gency.

3. Buckle the seat belt and allow the

seat belt to take up any slack. After
installation of the child restraint
system, try to move it in all direc-
tions to be sure the child restraint
system is securely installed.

If you need to tighten the belt, pull
more webbing toward the retractor.
When you unbuckle the seat belt and
allow it to retract, the retractor will
automatically revert back to its nor-
mal seated passenger emergency
locking usage condition.

MMSA3030

E2BLD310

E2MS103005

Содержание i20 Active 2016
















































































































































































































































































































Отзывы:

Нет отзывов