manualshive.com logo in svg

Hyundai i20 Active 2016, Руководство пользователя, Страница: 239 / 303

Поделиться
Скачать
Hyundai i20 Active 2016 Скачать руководство пользователя страница 239

! 

$#'

#"'
"'
 %'
$%'
&&

&%

E

Emergency towing 

If towing is necessary, we recom-
mend you have it done by an author-
ized HYUNDAI dealer or a commer-
cial tow truck service.

If towing service is not available in an
emergency, your vehicle may be
temporarily towed using a cable or
chain secured to the emergency tow-
ing hook at the front (or rear) of the
vehicle.
Use extreme caution when towing
the vehicle with a cable or chain. A
driver must be in the vehicle to steer
it and operate the brakes.
Towing in this manner may be done
only on hard-surfaced roads for a
short distance and at low speeds.
Also, the wheels, axles, power train,
steering and brakes must all be in
good condition.

Always follow these emergency tow-
ing precautions:
• Place the ignition switch in the

ACC  position so the steering
wheel is not locked.

• Place the shift lever in N (Neutral).
• Release the parking brake.
• Depress the brake pedal with more

force than normal since you will
have reduced braking perform-
ance.

• More steering effort will be

required because the power steer-
ing system will be disabled.

• Use a vehicle heavier than your

own to tow your vehicle.

• The drivers of both vehicles should

communicate with each other fre-
quently.

• Before emergency towing, check

that the hook is not broken or dam-
aged.

• Fasten the towing cable or chain

securely to the hook.

• Do not jerk the hook. Apply steady

and even force.

OIB064014

OIB064018

■

Front 
• Type A

■

Front 
• Type B

OIB064015

■ 

Rear

Содержание i20 Active 2016
















































































































































































































































































































Отзывы:

Нет отзывов