Hyundai i20 Active 2016 Скачать руководство пользователя страница 194

Страница: 194 / 303

&$&

(+
'+%#)

"()

'*+ !*

Starting the engine

Starting the petrol engine

Vehicle with manual transaxle:
1. Make sure the parking brake is

applied.

2. Make sure the shift lever is in neu-

tral.

3. Depress the clutch and brake ped-

als.

4. Turn the ignition switch to the

START position. Hold the key
(maximum of 10 seconds) until the
engine starts and release it.

Vehicle with automatic transaxle:
1.Make sure the parking brake is

applied.

2.Make sure the shift lever is in P

(Park) or N (Neutral).

3.Depress the brake pedal.
4.Turn the ignition switch to the

START position. Hold the key
(maximum of 10 seconds) until the
engine starts and release it.

Information

• Do not wait for the engine to warm

up while the vehicle remains station-
ary.

Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)

• Always start the vehicle with your

foot on the brake pedal. Do not
depress the accelerator while start-
ing the vehicle. Do not race the
engine while warming it up.

•

Always  wear  appropriate  shoes
when  operating  your  vehicle.
Unsuitable  shoes,  such  as  high
heels,  ski  boots,  sandals,  flip-
flops,  etc.,  may  interfere  with
your  ability  to  use  the  brake,
accelerator and clutch pedals.

•

Do not start the vehicle with the
accelerator pedal depressed. The
vehicle can move and lead to an
accident.

•

Wait until the engine rpm is nor-
mal. The vehicle may suddenly
move if the brake padel is
released when the rpm is high.

WARNING

Содержание i20 Active 2016
















































































































































































































































































































Результаты поиска

Содержание i20 Active 2016

Отзывы:

Похожие инструкции для i20 Active 2016

Бренды по названию

Популярные бренды

Hyundai i20 Active 2016, Руководство пользователя

Результаты поиска

Содержание i20 Active 2016

Отзывы:

Похожие инструкции для i20 Active 2016

Бренды по названию

Популярные бренды