manualshive.com logo in svg

Hyundai i20 Active 2016, Руководство пользователя, Страница: 39 / 303

Поделиться
Скачать
Hyundai i20 Active 2016 Скачать руководство пользователя страница 39

 

"
&$%'

#%#$&'

!"'
%

!'

&

&

To release the seat belt:

The seat belt is released by pressing
the release button (1) in the locking
buckle. When it is released, the belt
should automatically draw back into
the retractor.
If this does not happen, check the
belt to be sure it is not twisted, then
try again.

L

Lap belt (if equipped)

To fasten your seat belt:

To fasten a 2-point static type belt,
insert the metal tab into the locking
buckle. There will be an audible
"click" when the tab locks into the
buckle. Check to make sure the belt
is properly locked and that the belt is
not twisted.

With a 2-point static type seat belt, the
length must be adjusted manually so
it fits snugly around your body. Fasten
the belt and pull on the loose end to
tighten. The belt should be placed as
low as possible on your hips, not on
your waist. If the belt is too high, it
could increase the possibility of your
being injured in an accident. 

OLMB033088

OLMB033089

OLMB033090

Too high

Shorten

Correct

Содержание i20 Active 2016
















































































































































































































































































































Отзывы:

Нет отзывов