Hyundai HYC6200X, Руководство пользователя

Страница: 21 / 32

2 1
saw chain brake continued…
8.4.1 To confirm the inertia chain brake is operating correctly, follow these steps;
8.4.2 Turn OFF the engine.
8.4.3 Holding the chainsaw horizontally, release your hand from the front handle and allow
the tip of the chain bar to hit a stump or piece of wood and confirm the brake
operation.
8.4.4 If the brake is not effective ask your dealer to inspect and repair.
8.4.5 If the engine is still rotating with the brake engaged, it will overheat the clutch.
When the brake is operated you
MUST release the throttle leaver and allow the
engine to run at idle.
8.5 Sawing.
8.5.1
Before proceeding with your job ensure you’ve read and understood all aspects of
this manual.
8.5.2 It is recommended that you first practice sawing easy logs. This will also help you get
accustomed to your chainsaw.
8.5.3 Always follow safety regulations.
8.5.4 The chain must only be used for cutting wood. It is forbidden to cut other types of
material.
8.5.5 Vibrations and kickback will vary with different wood densities. DO NOT use the
chain saw as a lever for lifting, moving or splitting objects.
8.5.6 DO NOT lock the machine to fixed stands. It is forbidden to hitch tools or applications
to the P.T.O. that are not specified by the manufacturer.
8.5.7 It is not necessary to force the saw in to the cut.
8.5.8 Apply only light pressure when running the engine at full throttle.
8.5.9 If the saw chain gets caught in the cut, do not attempt to remove with force.
Instead use a wedge or lever to open the cut up to aid the release of the saw.
8.6 Kickback
8.6.1 This saw is equipped with a chain brake that will stop the chain in the event of
kickback. You
MUST check the chain brake operation before each use by running
the saw at full throttle for 1-2 seconds and pushing the front chain brake lever
forward and releasing the throttle trigger.
The chain should stop immediately with the engine at full speed.
If the chain is slow to stop or doesn’t stop, get your dealer to check and repair the
chain brake.
8.6.2 It is extremely important that the chain brake be checked for proper operation before
each use and that the chain is kept sharp in order to maintain the kickback safety
level of this saw.
Removal of any of the safety devices, inadequate maintenance or incorrect
replacement of the bar or chain, may increase the risk of serious personal injury.