Hyundai HYC6200X, Руководство пользователя

Страница: 23 / 32

2 3
9.7 With the guide bar dismounted, remove any saw dust in the bar groove (1) and
oiling port.
Lubricate
the nose sprocket using the fill port (2) on the tip of the bar.
9.8 Check for fuel leaks and repair as required.
9.9 Check for any loose fastenings and tighten as required.
9.10 Check for any damage to major parts especially handle joints and guide bar
mounting.
9.11 If any defects are found you MUST make sure they are repaired before operating the
machine.
9.12 Engine cylinder fins.
NOTE
Before any cleaning make sure that you block the air intake hole.
Remember to unblock after cleaning.
9.13 Any dust or debris between the cylinder fins will cause overheating of the engine.
You must periodically check and clean the cylinder fins by removing the air cleaner
and cylinder cover.
9.14 When refitting the cylinder cover, make sure that all switch wires and grommets do
not get trapped.
9.15 Spark Plug.
9.16 Clean the electrode with a soft wire brush and reset the plug gap to 0.65mm as
required.
1
2
0.65mm