13
AIR COMPRESSORS
Unpack and carefully inspect your tool. Become fully familiar with all its features
and functions.
Make sure all parts of the tool are present and in good condition. If any parts are
missing or damaged, have them replaced before using this tool.
UNPACKING THE PRODUCT
WARNING:
This device is very heavy and should NOT be unpacked and handled by
one person.
-
-
BEFORE USE
Installing transport wheels
Place the air compressor unit on a secure flat surface ready for mounting and
locate the transport wheels (14) and fixings.
Carefully lay the air compressor unit on its side to access the wheel mounting
hole.
Slide the axle (16) through the center of the transport wheel, followed by the
mounting hole in the wheel.
Secure using matching nut and lock washer.
Repeat steps 1 through 4 for the other side.
1.
2.
3.
4.
5.
Rubber foot installation
Place the air compressor unit on a secure, flat surface to reveal the foot mounting
hole (Image I). Locate the rubber foot (12) and the fixings.
Slide the supplied fixing bolt through the bottom of the rubber foot (Picture II), then
through the foot mounting hole secure with the corresponding nut.
Access to the other foot mounting hole is available from the current position of the
air compressor. Repeat steps 1-2.
1.
2.
3.
Air Filter Installation
The threaded air intake port is located on the side of the cylinder head (Image III).
Screw the air filter (15) into the air inlet port.
1.
2.
