FUNCTIONING
WARNING:
Always wear proper protective equipment, including eye, respiratory, and
hearing protection, when working with this tool.
Turn on and stop
Check that the compressor is disconnected from all air tools or air lines and that
the ON/STOP switch (6) is pressed.
Connect the machine to the main power supply.
Pull the ON/OFF switch (6) up. This will start the compressor.
1.
2.
3.
Line pressure setting
The pressure of the air supplied to the tool (line pressure) can be adjusted using
the pressure regulator (11). Line pressure is displayed on the gauge.
Increase the line pressure by turning the pressure regulator clockwise. To reduce
line pressure, turn the pressure regulator counterclockwise.
14
AIR COMPRESSORS
Let the compressor build pressure; the tank pressure is shown on the pressure
gauge (7). When the pressure in the reserve tank (1) reaches 8 bar (116 psi), the
motor will stop automatically.
Push the ON/OFF switch down to turn off the compressor.
4.
5.
-
-
