background image

Where  dust  or  fumes  are  created,  the  priority  should  be  to  control  them  at  the 
point of Where dust or fumes are created, the priority should be to control them at 
the point of

 

Select, maintain and replace the consumable / insert tool as recommended in the 
instruction manual, to avoid unnecessary buildup of dust or fumes.

Wear respiratory protection in accordance with the employer's instructions and as 
required by occupational health and safety regulations.

-

-

-

9

AIR COMPRESSORS

TOOL SAFETY 

Dust and smoke hazards

Exposure to high noise levels can cause permanent and disabling hearing loss and 
other problems, such as tinnitus (ringing, buzzing, hissing, or ringing in the ears). 
Therefore,  risk  assessment  and  the  implementation  of  appropriate  controls  for 
these risks are essential.

Appropriate  controls  to  reduce  risk  may  include  such  actions  as  cushioning 
materials to prevent work pieces from 'ringing'.

Wear  hearing  protection  in  accordance  with  the  employer's  instructions  and  as 
required by occupational health and safety regulations.

Operate and maintain this tool as recommended in the instruction manual to avoid 
an unnecessary increase in noise level.

Select, maintain and replace the consumable / insert tool as recommended in the 
instruction manual, to avoid unnecessary noise increase.

If  the  tool  has  a  muffler,  always  make  sure  it  is  in  place  and  in  good  condition 
when the tool is running.

-

-

-

-

-

-

Noise risks

This  information  should  draw  attention  to  vibration  hazards  that  have  not  been 
eliminated  by  design  and  construction  and  remain  residual  vibration  hazards.  It 
shall  enable  employers  to  identify  the  circumstances  in  which  the  operator  is  at 
risk  of  vibration  exposure.  If  the  vibration  emission  value  obtained  using  ISO 
28927-3 does not adequately represent the vibration emission in the intended uses 
(and  prevent  minimum  loads)  of  the  machine,  additional  information  and/or 
warnings  must  be  provided  to  enable  Risks  arising  from  vibration  evaluated  and 
managed.

 

Vibration exposure can cause disabling damage to the nerves and blood supply of 
the hands and arms.

-

-

Vibration risks

Содержание HYAC100-3S






















Отзывы: