background image

inverse way.

 WARNING: The general checking and combustion

regulation must be periodically executed by specialized 

personnel as prescribed by the law.

ELECTRIC DIAGRAM

See illustrations, page 9.

WATER DIAGRAM

See illustrations, page 8.

> REPAIRS - SPARE PARTS

For any problems not mentioned in this manual, or if 

the machine breaks down, you are urged to contact 

an Authorized After-Sales Service for the relative

repair or for any replacement of components with

original spare parts. Use exclusively original replace-

ment parts. 

> WARRANTY CONDITIONS

All our machines are subjected to strict tests and are

covered against manufacturing defects in accordance

with applicable regulations (minimum 12 months). The 

warranty is effective from the date of purchase. If your 

high pressure washer or accessories are handed in for

repair, a copy of the receipt must be enclosed. 

Guarantee repairs are being made on the following 

conditions: - That defects are attributable to flaws or

defects in materials or workmanship. - That the direc-

tions of this instruction manual have been thoroughly

observed. - That repair has not been carried out or at-

tempted by other than authorized service staff. - That

only original accessories have been applied. - That the

product has not been exposed to abuse such as knocks, 

bumps or frost. - That only water without any impuri-

ties has been used. - That the high pressure washer has 

not been used for rental nor used commercially in any 

other way. 

The following are not included in the warranty: -

Parts subject to normal wear. - The high-pressure tube 

and optional accessories. - Accidental damage, caused 

by transport, neglect or inadequate treatment, incor-

rect or improper use and installation failing to comply

with the indications in the instruction manual. - The

warranty shall not cover any cleaning operations to

which the operative components may be subjected.

Repairs under this guarantee include replacement of

defective parts, exclusive of packing and postage/car-

riage. The warranty shall not cover replacement of the

machine or extension of the guarantee resulting from a 

breakdown. The manufacturer declines all responsibi-

lity for damage to persons or property caused by bad

installation or incorrect use of the machine.

WARNING! Failures, such as clogged nozzles, valves 

and mechanism blocked due to limestones, damaged 

pressure cleaner accessories (like kinked high pressure 

hose) and/or appliances normally working without any 

defects ARE NOT COVERED BY THE WARRANTY.

> DISPOSAL

As the owner of electrical or electronic equipment,

the law (in accordance with the EU Directive 2012/19/

EU n waste from electrical and electronic equipment 

and the national laws of the EU Member States that have 

implemented this Directive) prohibits you from disposing 

of this product or its electrical / electronic accessories as 

municipal solid waste and obliges you to make use of the 

appropriate waste collection facilities.

The product can be disposed of by returning it to the distri-

butor when a new product is purchased. The new product 

must be equivalent to that being disposed of.

Disposing of the product in the environment can cause 

great harm to the environment itself and human health.

The symbol in the figure indicates the urban wa-

ste containers and it is strictly prohibited to di-

spose of the equipment in these containers. Non-

compliance with the regulations stipulated in the 

Directive 2012/19/EU and the decrees implemented in the 

various EU Member States is administratively punishable. 

TROUBLESHOOTING

Before doing any work on the machine, disconnect the 

electricity and water supplies and discharge the pres-

sure. Proceed systematically to identify Faults following 

the chart below; if you are still unable to eliminate the 

problem, call in the Authorized After-Sales Service.

EN

17

Содержание HY150HPW-1

























Отзывы: