5
Connection
Video/audio system connection
Before you start connection of external
devices, ensure that power of the unit is
switched off.
Following outputs are available in this unit.
Composite video
Use the yellow plug of an AV cable to
connect the composite video output of this unit
to the video input of a TV/monitor.
Component video
Use a 3-core AV cable to connect the
component outputs of this unit to the
corresponding inputs of a TV/monitor.
S-video
Use an S-Video cable to connect the
S-Video output of this unit to the S-Video input
of a TV/monitor.
Stereo audio
Use a pair of AV cables (red for right/white
for left) to connect the stereo audio outputs of
this unit to the TV or a stereo input of power
amplifier.
SCART
Use a 21-pin SCART cable to connect the
SCART output of this unit to the TV/monitor
SCART input.
Coaxial digital audio
Use a special coaxial cable to connect the
coaxial output of this unit to the coaxial input of
an external device.
Speaker connection
Use a special cables to connect the
speaker output terminals of this unit to the
corresponding speakers.
Line in connection
This unit has an extra group of audio input
terminals. You can input the analogue stereo
audio signals from extra devices such as DVD,
VCD, CD, VCR player, etc. Use the audio
cable (red for right, white for left) to connect
the stereo audio output terminals of an extra
device to the stereo input terminals (LINE IN)
of this unit. Its corresponding signal source
is LINE, which can be available by pressing
SOURCE SELECT button.
• The connection you should make
depends on the TV/monitor input terminals.
Don’t make all the connections at the same time;
otherwise the produced picture will be affected.
• The physical connection should accord to
the audio/video output setup of this unit.
