Hyundai DVBT231, Руководство пользователя

Страница: 40 / 60

EN - 40
SAFETY INSTRUCTIONS
● Always read the safety instructions carefully
● Keep this User‘s Manual for future reference
● Keep this equipment away from humidity
● Lay this equipment on a reliable flat surface before setting it up. Do not stand it on soft fur -
nishings.
● If any of the following situation arises, get the equipment checked by a service technician:
– The equipment has been exposed to moisture.
– The equipment has been dropped and damaged.
– The equipment has obvious sign of breakage.
– The equipment has not been working well or you cannot get it work
according to User‘s Manual.
Warning
● To prevent the risk of electric shock, do not open the cover or the back of the receiver.
● Do not block the ventilation holes of the device. Leave appropriate gap above and around it to
allow for adequate ventilation.
● Do not place the device in an unventilated cabinet or on top of a unit which emits heat.
Copyright Statement
No part of this publication may be reproduced in any form by any means without the prior written
permission. Other trademarks or brand names mentioned herein are trademarks or registered
trademarks of their respective companies.
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make
any representations or warranties (implied or otherwise) regarding the accuracy and completeness
of this document and shall in no event be liable for any loss of profit or any commercial damage,
including but not limited to special, incidental, consequential, or other damage.
This symbol indicates that this product incorporates double insulation between hazar-
dous mains voltage and user accessible parts. When servicing use only identicial repla-
cement parts.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or cords.
1. The apparatus shall not be exposed to dripping or Splashing and that no objects filled with
liquids, such as Vases, shall be placed the apparatus.
2. The mains plug is used as the disconnect device, the disconnect device shall remain readily
operable.
3. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected
from the mains.
4. The mains plug of apparatus should not be obstructed or should be easily accessed during
intended use.