Hyundai DV5H835, Инструкция по эксплуатации

Страница: 73 / 88

EN - 73
EN
2.6 3D PROCESSING
2.6.1 PRO LOGIC II
Pro Logic II: This unit allows you to configure Dolby Pro Logic II to expand 2-channel source
audio into full 5.1- channel surround sound.
NOTE: Pro Logic II functionality is effective only when DOWNMIX is set to 5.1Ch and DIGITAL
OUTPUT is set to SPDIF/RAW.
2.6.1.1 PRO LOGIC II
This item is used to turn on or off the Pro Logic II processing.
ON: Pro Logic II processing is always on.
OFF: Pro Logic II processing is disabled
AUTO: Pro Logic II processing is on only when Dolby Pro Logic II encoded content is detected.
2.6.1.2 MODE
This item is used to set the processing mode of Pro Logic II and is available only when the Pro
Logic II processing is turned on.
MUSIC: Sound from all speakers arrive at the same time with no delay.
MOVIE: 10ms delay is added to the surround channels.
PRO LOGIC: Earlier version of Dolby Pro Logic processing.
AUTO: Automatically selects processing mode based on the input format.
2.6.1.3 PANORAMA
This item is used to turn on/off panorama mode and is available only when MODE is set to
MUSIC .
When panorama mode is turned on, the front stereo audio is partially fed into the surround
channels for an enveloping effect.
2.6.1.4 DIMENSION
This item is available only when MODE is set to MUSIC .
This item allows gradual adjustment of the sound field either towards the front or towards the
rear. This is useful in setting a more even balance from all speakers with some rooms.
2.6.1.5 CENTER WIDTh
This item is available only when MODE is set to MUSIC .
This item can be used to control the width of the center channel sound effect by blending the
center speaker to the left and right speakers. As the level number increases, the center channel
sound moves toward the left and right speakers.
2.6.2 REVERB MODE
Select a reverb mode in this item.