•
If you cannot hear the click-lock sound,
this suggests the radio is not locked into
position.
•
Remove the radio. Check that the radio
harness is towards the rear and is not
impeding the insertion of the radio.
•
Re-insert the radio and push it firmly into
position until you hear the click-lock
sound.
•
Confirm that the radio is secure.
16. Place the supplied dress ring over the front
of the radio and firmly press into position.
Please note: that the dress ring has a
small hole on one side. This hole side is
meant to be installed on the right hand
side of the radio. (See photo).
17. Place the owners manual and Anti-Theft
security code plastic card within its
plastic sleeve into the glove box.
18.
Anti-Theft warning window stickers.
These stickers are supplied with each unit. They need be installed on both
front windows
.
•
Driver’s side window is to be positioned on the lower left hand corner
on the inside of window.
•
Passenger side window is to be positioned on the lower right hand
corner on the inside of window.
•
Please take care that you install the stickers in a straight line parallel
with the top of door line.
4. REMOVAL
PROCEDURE.
1.
Using the supplied dress ring removal Key,
slide the thin end of the key all the way into
the right hand side small hole, and hook-lift
this side of the dress out until you can
remove the dress ring by hand.
(See photo)
2.
Using the supplied radio removal keys, insert
each key to the extreme outside of the radio
57