PROCEDURE.
To activate the security code, please follow these steps.
1) Turn on the unit.
2) If the unit screen indicates “1 CDE”, this is a message that you need to enter
the anti-theft security code.
3) The security code number can be found printed on the plastic card supplied.
Every Hyundai stereo has it’s own individual anti-theft security code. Entering
an incorrect code or using incorrect procedures will not activate the stereo to
an operational status.
4)
Every Hyundai stereo has it’s own individual anti-theft security code. Entering
an incorrect code or using incorrect procedures will not activate the stereo to
an operational status.
5)
The anti-theft code is made up of four computer-generated numbers.
6)
For example the code may be
7963
.
7)
To enter code
7963
into the audio unit, always follow these steps,
Please note: the following operation requires the use of tuner buttons in order of
(1) to (4) only.
a)
Press tuner button number one (1),
seven times. (7)
b)
Press tuner button number two (2),
nine times. (9)
c)
Press tuner button number three (3),
six times. (6)
d)
Press tuner button number four (4),
three
times. (3)
e)
Check that the code shown on the screen is correct.
f)
Press tuner button number five (5)
once to activate the code
.
8)
Important:
If you have entered the incorrect anti-theft code or used an
incorrect procedure at your first attempt, the audio screen will exhibit the
following message “2 CDE”. This means you need to enter the code a second
time, taking care to follow the instructions and enter the correct code.
9) If the stereo screen shows the message “3 CDE”, this means a 2
nd
incorrect
code was entered.
10) If a 3
rd
incorrect code in entered the audio unit will turn off. A period of at least
one hour must pass before attempting to re-enter the correct anti-theft security
code number using the above procedures correctly.
11) Confirm tuner operation.
28