background image

1

FEATURES OF YOUR HYUNDAI

74

HEATING CONTROLS

B690A02S-AAT

For normal heating operation, set the air intake
control to the "Fresh" position and the air flow
control to "Floor".

For faster heating, the air intake control should
be in the "Recirculation" position.

If the windows fog up, move the air flow control
to the "Def" (defroster) position. (The A/C will
turn on automatically and "Fresh" mode will be
activated.)

For maximum heat, rotate the temperature
control to the farthest right position.

B690A01GK-A

*

The A/C or the air intake control switch return
to its former setting.

A/C

ON

ON or OFF *

ON or OFF *

ON

ON

NOTE:

o The air intake control switch will change

to "        " mode when the ignition switch
is turned "ON" with the MAX A/C mode
selected.

o When you change to another mode from

MAX A/C, the A/C and the air intake
control switch are set to the following
chart.

Air Intake

Control Switch

           or         *

BI-LEVEL HEATING

B700A02E-AAT

Your Hyundai is equipped with bi-level heating
controls. To use this feature:

o Set the air intake control to the fresh air (           )

position.

o Set the air flow control at the bi-level (     )

position.

o Adjust the fan speed control to the desired

speed.

o Set the temperature control between "Cool"

and "Warm".

B700A01GK-A

Содержание 2005 Tiburon







































































































































































































































































Отзывы: