manualshive.com logo in svg

Hyundai 2005 Tiburon, Руководство пользователя, Страница: 245 / 262

Поделиться
Скачать
Hyundai 2005 Tiburon Скачать руководство пользователя страница 245

8

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS

10

I070A01A-AAT

TIRE BALANCING

A tire that is out of balance may affect
handling and tire wear. The tires on your
Hyundai were balanced before the car
was delivered but may need balancing
again during the years you own the car.
Whenever a tire is dismounted for re-
pair, it should be rebalanced before
being reinstalled on the car.

!

WARNING:

Do not mix bias-ply and radial-ply
tires under any circumstances. This
may cause dangerous handling char-
acteristics.

!

WARNING:

When rotating the 215/45 R17 tires,
the tires must be mount following
the "ROTATION" direction marked
on the sidewall of the tires.
If rotating the tires from the left side
to the right side and from the right
side to the left side, separate the
wheel from the tire and then remount
them.

Sidewall

HGK5018

Tire rotation
direction

Содержание 2005 Tiburon







































































































































































































































































Отзывы:

Нет отзывов