background image

3

WHAT TO DO IN AN EMERGENCY

13

!

HGK4017

CAUTION:

A vehicle with an automatic transaxle should
never be towed from the rear with the front
wheels on the ground. This can cause se-
rious damage to the transaxle.  Be sure to
use a towing dolly under the front wheels.

EMERGENCY TOWING

D080D02A-AAT

For emergency towing when no commercial
tow vehicle is available, attach a tow cable,
chain or strap to one of the towing hooks under
the front /rear of your car. Do not attempt to tow
your vehicle in this manner on any unpaved
surface. This could result in serious damage to
your car.
Nor should towing be attempted if the wheels,
drive train, axles, steering or brakes are dam-
aged. Before towing, be sure the transaxle is in
neutral and the key is in "ACC" (with the engine
off) or in the "ON" position (with the engine
running).  A driver must be in the towed car to
steer it and operate the brakes.

HGK4018

Front

Rear

!

CAUTION:

o If the car is being towed with all four

wheels on the ground, it can be towed
only from the front. Be sure that the
transaxle is in neutral. Do not tow at
speeds greater than 30 mph (50 km/h)
and for more than 15 miles (25 km).

o Be sure the steering is unlocked by plac-

ing the key in the "ACC" position. A
driver must be in the towed vehicle to
operate the steering and brakes.

o Automatic Transaxle:

Be sure to use a towing dolly under the front
wheels.

3) It is recommended that your vehicle be

towed with all the wheels off the ground.

Содержание 2005 Tiburon







































































































































































































































































Отзывы: