manualshive.com logo in svg

Hyundai 2005 Tiburon, Руководство пользователя, Страница: 168 / 262

Поделиться
Скачать
Hyundai 2005 Tiburon Скачать руководство пользователя страница 168

3

8

WHAT TO DO IN AN EMERGENCY

D060E01A-AAT

4. Put the Jack in Place

The base of the jack should be placed
on firm, level ground. The jack should
be positioned as shown in the drawing.

D060F02E-AAT

5. Raising the Car

After inserting a bar into the wheel nut
wrench, install the bar into the jack as
shown in the drawing. To raise the
vehicle, turn the jack handle clockwise.
As the jack begins to raise the vehicle,
double check that it is properly posi-
tioned and will not slip. If the jack is on
soft ground or sand, place a board,
brick, flat stone or other object under
the base of the jack to keep it from
sinking.

HGK4012

HFC4022

Wrench bar

Wheel nut
wrench

D060D02A-AAT

3. Loosen Wheel Nuts

The wheel nuts should be loosened
slightly before raising the car. To loosen
the nuts, turn the wrench handle coun-
terclockwise. When doing this, be sure
that the socket is seated completely
over the nut so it cannot slip off. For
maximum leverage, position the wrench
so the handle is to the left as shown in
the drawing. Then, while holding the
wrench near the end of the handle, push
down on it with steady pressure.  Do not
remove the nuts at this time. Just
loosen them about one-half turn.

HGK4013

Содержание 2005 Tiburon







































































































































































































































































Отзывы:

Нет отзывов