manualshive.com logo in svg

Hyundai 2002 Sonata, Руководство пользователя, Страница: 46 / 166

Поделиться
Скачать
Hyundai 2002 Sonata Скачать руководство пользователя страница 46

FEATURES OF YOUR HYUNDAI

1- 37

B410A01A-AAT

INSTRUMENT PANEL LIGHT CON-
TROL (RHEOSTAT)

The instrument panel lights can be made bright-
er or dimmer by turning the instrument panel
light control knob.

B420A02A-AAT

CIGARETTE LIGHTER

froster cycle, push in on the switch again after
it has turned itself off.

CAUTION:

Do not clean the inner side of the rear
window glass with an abrasive type of glass
cleaner or use a scraper to remove the
foreign deposits from the inner surface of
the glass as this may cause damage to the
defroster elements.

NOTE:

The engine must be running for the rear
window defroster to operate.

B400A01A-AAT

DIGITAL CLOCK

There are three control buttons for the digital
clock. Their functions are:

HOUR - Push "H" to advance the hour indi-
cated.
MIN - Push "M" to advance the minute indicat-
ed.
RESET - Push "R" to reset minutes to ":00" to
facilitate resetting the clock to the  correct time.
When this is done:

Pressing "R" between 10 : 30 and 11 : 29
changes the readout to 11 : 00.
Pressing "R" between 11 : 30 and 12 : 29
changes the readout to 12 : 00.

HEF-107A

B400A02Y

B420A01O

For the cigarette lighter to work, the key must
be in the "ACC" position or the "ON" position.
To use the cigarette lighter, push it all the way
into its socket. When the element has heated,
the lighter will pop out to the "ready" position.
Do not hold the cigarette lighter pressed in. This
can damage the heating element and create a
fire hazard.
If  it is necessary to replace the cigarette lighter,
use only a genuine Hyundai replacement or its
approved equivalent.

WARNING:

Do not use electric accessories or equip-
ment other than the Hyundai genuine parts
in the socket.

Содержание 2002 Sonata







































































































































































Отзывы:

Нет отзывов