manualshive.com logo in svg

Hyundai 2002 Sonata, Руководство пользователя, Страница: 135 / 166

Поделиться
Скачать
Hyundai 2002 Sonata Скачать руководство пользователя страница 135

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

  6-7

Your engine was originally equipped with plati-
num-tipped spark plugs.
Platinum-tipped spark plugs will last longer than
conventional type spark plugs and can be iden-
tified by blue lines on the ceramic shell.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark
plugs.

plugs.

plugs.

plugs.

plugs.

G060B04Y-AAT

Replacing the Spark Plugs

Replacing the Spark Plugs

Replacing the Spark Plugs

Replacing the Spark Plugs

Replacing the Spark Plugs

The spark plugs should be changed at the
intervals specified in the vehicle maintenance
schedule in Section 5 or whenever engine per-
formance indicates they should be changed.
Symptoms that suggest poor spark plug perfor-
mance include engine misfiring under load, loss
of fuel economy, poor acceleration, etc. When
spark plugs are replaced, always use spark
plugs recommended by Hyundai. The use of
other spark plugs can result in loss of perfor-
mance, radio interference or engine damage.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

When replacing the spark plugs, always use

When replacing the spark plugs, always use

When replacing the spark plugs, always use

When replacing the spark plugs, always use

When replacing the spark plugs, always use
the genuine parts recommended.

the genuine parts recommended.

the genuine parts recommended.

the genuine parts recommended.

the genuine parts recommended.

Type

RN10PYP4 (CHAMPION)
PGR5C-11 (NGK)

RC10PYPB4
(CHAMPION)
PFR5N-11 (NGK)

Remark

For 2.4L only

For 2.7L only

G060C04Y-AAT

Changing the Spark Plugs

Changing the Spark Plugs

Changing the Spark Plugs

Changing the Spark Plugs

Changing the Spark Plugs

You will find it easier to change spark plugs if
the engine is cold. Always change one spark
plug at a time. This helps avoid getting the wires
mixed up.

1. Remove the center (2.4 L) cover on the

engine rocker cover.

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

It is recommended that the engine be cool

It is recommended that the engine be cool

It is recommended that the engine be cool

It is recommended that the engine be cool

It is recommended that the engine be cool
or cold when changing 

or cold when changing 

or cold when changing 

or cold when changing 

or cold when changing the spark plugs. If

the spark plugs. If

the spark plugs. If

the spark plugs. If

the spark plugs. If

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself
on the insulated 

on the insulated 

on the insulated 

on the insulated 

on the insulated connector, the spark plug

connector, the spark plug

connector, the spark plug

connector, the spark plug

connector, the spark plug

or the engine itself.

or the engine itself.

or the engine itself.

or the engine itself.

or the engine itself.

G060C02O

G060C01O

Recommended Spark Plugs:

Recommended Spark Plugs:

Recommended Spark Plugs:

Recommended Spark Plugs:

Recommended Spark Plugs:

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For
2.7L Engines) should be changed by an

2.7L Engines) should be changed by an

2.7L Engines) should be changed by an

2.7L Engines) should be changed by an

2.7L Engines) should be changed by an
authorized Hyundai dealer.

authorized Hyundai dealer.

authorized Hyundai dealer.

authorized Hyundai dealer.

authorized Hyundai dealer.

2. Using a clean cloth, remove any dirt that has

accumulated around the base of the spark
plug so it cannot fall into the cylinder when
the spark plug is removed.

3. To remove the spark plug cable, pull straight

up on the insulated connector, not the cable.
Pulling on the cable may damage the carbon
core conductor.

Содержание 2002 Sonata







































































































































































Отзывы:

Нет отзывов