background image

WHAT TO DO IN AN EMERGENCY

3-4

D060A01A-AAT

CHANGING A FLAT TIRE

The procedure described on the following pages
can be used to rotate tires as well as to change
a flat tire. When preparing to change a flat tire,
check to be sure the gear selector lever is in "P"
(automatic) or reverse gear (manual transaxle)
and that the parking brake is set, then:

Remove the spare tire, the jack and tool bag
from the trunk.

D060B01Y-AAT

1. Obtain Spare Tire and Tool

D040B01Y

2. When the car is stopped, turn on your emer-

gency hazard flashers, set the parking brake
and put the transaxle in "P" (automatic) or
reverse (manual transaxle).

3. Have all passengers get out of the car. Be

sure they all get out on the side of the car
that is away from traffic.

4. Change the tire following the instructions

provided on the following pages.

D060A01Y

D060K02Y-AAT

Wheel Cover (If installed)

D060K06Y

1. Wrap a piece of cloth around the tip of the

wrench bar to avoid scratching.

2. Insert the wrench bar into the notch of the

wheel cover and pry gently to remove the
wheel cover.

3. Change the flat tire.

D060K05Y

4. Reinstall the wheel cover by fitting the boss

of the wheel cover in the groove of the
wheel, hitting the center of the wheel cover
with your hand.

Alumium Wheel

Steel Wheel

Содержание 2002 Sonata







































































































































































Отзывы: