HYTROL DC62, Руководство по установке и обслуживанию

Страница: 2 / 16

2
TABLE OF CONTENTS
INTRODUCTION
Receiving and Uncrating . . . . . . . . . . . . . . . . . . . .2
How to Order Replacement Parts . . . . . . . . . . . . .2
SAFETY INFORMATION . . . . . . . . . . . . . . . . 3
INSTALLATION
Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Conveyor Set-Up. . . . . . . . . . . . . . . . . . . . . . . . . .4
Racked Sections . . . . . . . . . . . . . . . . . . . . . . . . . .4
Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . .5
OPERATION
Conveyor Start-Up. . . . . . . . . . . . . . . . . . . . . . . . .5
MAINTENANCE
Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Drive Chain Tension Adjustment. . . . . . . . . . . .5, 6
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . .6
Maintenance Checklist . . . . . . . . . . . . Back Cover
REPLACEMENT PARTS
DC62 Parts Drawing & List . . . . . . . . . . . . . . . . . .7
DC63 Parts Drawing & List . . . . . . . . . . . . . . . . . .8
DC82 Parts Drawing & List . . . . . . . . . . . . . . . . . .9
DC83 Parts Drawing & List . . . . . . . . . . . . . . . . .10
Spanish Version . . . . . . . . . . . . . . . . . . . . . . . . .11
INTRODUCTION
This manual provides guidelines and procedures for installing,
operating, and maintaining your conveyor. A complete parts list
is provided with recommended spare parts highlighted in gray.
Important safety information is also provided throughout the manual.
For safety to personnel and for proper operation of your conveyor, it
is recommended that you read and follow the instructions provided
in this manual.
• Receiving and Uncrating
1. Check the number of items received against the bill of lading.
2. Examine condition of equipment to determine if any damage
occurred during shipment.
3. Move all crates to area of installation.
4. Remove crating and check for optional equipment that may be
fastened to the conveyor. Make sure these parts (or any foreign
pieces) are removed.
• How to Order Replacement Parts
Included in this manual are parts drawings with complete replacement
parts lists. Minor fasteners, such as nuts and bolts, are not
included.
When ordering replacement parts:
1. Contact Dealer from whom conveyor was purchased or nearest
HYTROL Integration Partner.
2. Give Conveyor Model Number and Serial Number or HYTROL
Factory Order Number.
3. Give Part Number and complete description from Parts List.
4. Give type of drive. Example—8” End Drive, 8” Center Drive, etc.
5. If you are in a breakdown situation, tell us.
HYTROL Serial Number
(Located near Drive on Powered Models).
NOTE: If damage has occurred or freight is missing,
Contact your Hytrol Integration Partner.
Jonesboro, Arkansas
Serial #
615415
Model
TA
QR Code
YEAR