Hytera HM78 Series Скачать руководство пользователя страница 54

Страница: 54 / 64



To enable the Roam Feature, do either of the following:



Press the preprogrammed

Roam

key.



Go to

Menu

Roam

On/Off

, and then press the

OK/Menu

key.



To set the roam list, go to

Menu

Roam

Roam List

, select a roam list, and then add or delete channels in

the list.

A roam list contains a group of channels under monitoring. Each list contains up to 32 channels.

8.9.2 Trunking Mode

The Roam feature allows the radio to be registered with a non-home BS or network when it is on move. When the

radio detects signal, it initiates the registration.

This feature is enabled by your dealer.

8.10 Clarity Transmission

The Clarity Transmission feature allows data transferred from one external device to another using the radio. The

radio serves as the transparent transmission channel for data exchange between external devices without any

additional adjustment. This feature is enabled by your dealer.

8.10.1 Conventional Mode

When the radio receives the data through the serial port, it transfers the data to a preset contact excluding an all call

contact.

8.10.2 Trunking Mode

When the radio receives the data through the serial port, it transfers the data to a preset private or group contact by

using short data or packet data.

To enable or disable the feature, press the preprogrammed

Clarity Transmission Mode

key.

In the Clarity Transmission mode, the radio is capable of only transmitting or receiving data.

8.11 DGNA

The Dynamic Group Number Assignment (DGNA) feature allows you to initiate a call to or receive a call from a

dynamic group temporarily created by a dispatch station. The created dynamic group is saved in a dynamic group

menu on the radio.

The radio displays "DGNA Successful" when the dynamic group is added and "DGNA Deleted" when the dynamic

group is deleted. You cannot use the dynamic group after it is deleted.

Содержание HM78 Series

































































Результаты поиска

Содержание HM78 Series

Отзывы:

Похожие инструкции для HM78 Series

Бренды по названию

Популярные бренды

Hytera HM78 Series, Руководство пользователя

Результаты поиска

Содержание HM78 Series

Отзывы:

Похожие инструкции для HM78 Series

Бренды по названию

Популярные бренды