Hytera HM78 Series Скачать руководство пользователя страница 48

Страница: 48 / 64

8.4.2.2 Post-registration Hunt

After successful registration, you can hunt again by pressing the preprogrammed

Manual Current Hunt

key. To

ensure seamless communications, you can enable the hunt modes as listed in the following table.

Hunt Mode

Description

Operation

Background Hunt

This feature allows an idle radio to keep detecting the

signal strength of the BS with which it registers. If the

signal strength goes below the threshold level preset by

the dealer, the radio will automatically hunt for an

adjacent BS with stronger signal strength and register

with it.



Go to

Menu

Scan

, and then

press the

OK/Menu

key to

enable

Background

Hunt

Home

Sta.

Hunt

Handover



Press

the

preprogrammed

Background

Hunt

HomeStation Hunt

, or

Multi-

site Handover

key.

Home Station Hunt

In a BS overlapping area, this feature allows the radio to

switch back to the home station channel when its signal

strength reaches the preset threshold. It is recommended

that you set your frequently used channel as the home

station channel.

Handover

The signal strength received from a BS may fluctuate due

to position change, affecting the communication quality

of the radio. On such occasions, this feature allows the

radio to automatically register with the BS with stronger

signal.

Vote Now

This feature allows an idle radio to check the signal

strength of the BS assigned in a broadcast call, and decide

whether to register with the BS.

This feature is enabled by default.

8.5 Positioning

The Positioning feature allows you to collect the position information of the radio through satellites.

This feature applies only to radios with GPS, BDS, or GLONASS.

8.5.1 Enabling the Positioning Feature



In conventional mode, go to

Menu

GPS

GPS On/Off

COMPASS On/Off

, or

GLONASS On/Off

, and

then press the

OK/Menu

key to enable the positioning system.

Содержание HM78 Series

































































Результаты поиска

Содержание HM78 Series

Отзывы:

Похожие инструкции для HM78 Series

Бренды по названию

Популярные бренды

Hytera HM78 Series, Руководство пользователя

Результаты поиска

Содержание HM78 Series

Отзывы:

Похожие инструкции для HM78 Series

Бренды по названию

Популярные бренды