4. Signalling squelch will turn back ON when you press
the key programmed as [MONI] or when no signal is
received for the preset time period.
Auto Transpond
The Auto Transpond function can be programmed by your
dealer to use with the Code Squelch function. When
activated, the radio will send a transpond signal when
receiving the matching code. Four types of transpond sig-
nal can be programmed by your dealer:
z
z
z
z
z
Ringing tone
z
z
z
z
z
Alert Tone
z
z
z
z
z
Transpond code
z
z
z
z
z
Alert Tone + Transpond code
Press any key to stop the ringing tone.
Off-Hook Decode
If your dealer has activated the feature, CTCSS/DCS de-
code signalling will be activated only when the microphone
is on-hook; otherwise, decode signalling is deactivated
during the off hook condition, squelch works as carrier
squelch.
Time-Out-Timer (TOT)
Time-out-Timer (TOT) feature can be set in each zone.
¡ö
¡ö
¡ö
¡ö
¡ö
TOT
TOT is used to prevent user from transmitting on the same
channel for extended period of time. This also protects the
radio from damage caused by long time transmissions.
If continuous transmission exceeds the preset time
(15-1200 seconds), the transmission will be inhibited and
an alert tone will sound. Release the [PTT] key to stop the
alert tone.
¡ö
¡ö
¡ö
¡ö
¡ö
TOT Pre-Alert
When this feature is activated, the radio will sound an alert
tone at the programmed pre-alert time before TOT expires.
TOT will expire when the selected time passes after a
“Pre-Alert Tone”. Pre-alert time (1-10 seconds before the
TOT expiration) is set by your dealer.
¡ö
¡ö
¡ö
¡ö
¡ö
TOT Rekey Time
When this feature is activated, transmission will remain
inhibited until TOT Re-key Time expires, even if you have
pressed the [PTT] key. Rekey time (Off, 1-60 seconds ) is
set by your dealer.
Basic Operations
23
ＴＭ８００．ｐ６５
2005-6-29, 10:16
24
