HYT TM-800 Скачать руководство пользователя

Страница: 20 / 53

¡ö

Look Back Temporary Disable

When scanning looks back and stops on a priority channel,

press the key programmed as [Add/Del] to deactivate the

Look Back function.

¡ö

Nuisance Channel Temporary Delete

This feature allows you to temporarily add/delete a chan-

nel to/from the scan list during scanning.

When scanning stops on an undesired channel (e.g. nui-

sance channel), press the key programmed as [Add/Del],

the channel is temporarily removed from the scan list and

scanning resumes.

Note:

The addition/ deletion of channels are not saved

when radio exits from the scan mode.

¡ö

Revert Channel

Press the [PTT] key during scanning, the radio will stop

scanning and switch to the preset revert channel

(programmed by your dealer) for transmission.

Basic Operations

¡ö

Off Hook Scan

Normally scanning is not controlled by microphone hook

status, it also means that the radio always scans, and

stops by signal presence. But if your dealer has programmed

Off Hook Scan feature, microphone must be on hook for

scanning.

Busy Channel Lockout (BCL)

When activated by your dealer, the BCL feature will pre-

vent you from talking on a channel that is already in use.

Press the [PTT] key while the channel is in use, the radio

will emit an alert tone and transmission will be inhibited.

Release the [PTT] key to stop the alert tone. Wait until the

channel is not in use before you try to transmit again.

BCL Override

If BCL Override feature is activated, you can override the

BCL feature and transmit on a busy channel. To override

the BCL, release the [PTT] key when the alert tone sounds,

then press the [PTT] key again within 0.5 second.

ＴＭ８００．ｐ６５

2005-6-29, 10:16

Содержание TM-800






















































Результаты поиска

Содержание TM-800

Отзывы:

Похожие инструкции для TM-800

Бренды по названию

Популярные бренды

HYT TM-800, Руководство пользователя

Результаты поиска

Содержание TM-800

Отзывы:

Похожие инструкции для TM-800

Бренды по названию

Популярные бренды