TC-518 Owner’s Manual
7
Target Radio
1. The LED flashes green when cloning is in
progress.
2. The green LED goes out when cloning is
completed.
Power On
1. The power-on alert tone is heard when the
radio is powered on.
2. When the current channel is idle, beeps are
heard.
Low Battery Alert
The LED flashes red and the low pitched tone
is heard every ten seconds.
Transmitting
1. Red LED.
2. When transmission times out, beeps are
heard.
3. TOT Pre-alert: One beep is heard.
Receiving
The LED glows green when carrier presents.
Scanning
1. The LED flashes green every 1 second
when detecting.
2. Scan Start Tone (programmable by your
dealer): One beep is heard.
3. Scan Stop Tone (programmable by your
dealer): One beep is heard.
Programming
Reading: The LED flashes red.
Writing: The LED flashes green.
Power Adjust
From High to Low Power: The low pitched tone
is heard.
From Low to High Power: The high pitched
tone is heard
VOX/Compandor/Scrambler/Channel Lock
Enable VOX: A high pitched tone is heard.
Disable VOX: Two continuous pitched tones
are heard.
(9) Microphone
(10)Speaker
(11) Battery Latch
(12) Earpiece Jack & Programming Port
(13) Accessory Cover
(14) Belt Clip
(15) Battery
(16) Screw, Belt Clip
(17) Charging Piece