TC-518 Owner’s Manual
6
⑬
Earpiece Cover
⑭
Belt Clip
⑮
Battery
⑯
Belt Clip Screw
⑰
Charging Piece
(1) Power Key
(2)PTT (Push-to-Talk) Key
Used to switch between transmit and receive modes. Hold down the PTT key and speak into the
microphone to transmit, and release it to receive.
(3) SK1 Key
Side key 1, programmable. Your dealer can assign one function to the key via the programming
software.
(4) SK2 Key
Side key 2, programmable. Your dealer can assign one function to the key via the programming
software.
(5) Antenna
(
6) LED Indicator
(7) Channel Selector Knob
Rotate the knob to select a desired channel among channels 1 to 16.
(8) Volume Control Knob
Turn the knob up (+) to increase the volume, or down (-) to decrease the volume.
LED Indicator Statuses refer to followings:
Status
LED Indication and Alert Tone
Source Radio: Power on the
radio while holding down the
SK2 key.
Target Radio: press the power
key to turn the radio on.
The LED flashes orange once.
User Wired Clone
Source Radio: Power on the
target radio and connect the
cloning cable. Then press the
SK2 key on the source radio to
initiate cloning.
1. The LED flashes red when cloning is in
progress.
2. The red LED goes out when cloning is
completed.
3. The red LED goes out when cloning fails.
