TC-518 Owner’s Manual
23
Figure 2
Scan On/Off
You can enter scan mode through the following two methods:
1. Key operation
Press the programmed [Scan] key to enter scan mode, provided that there’re no less than 2
members in the scan list.
2. Auto
When Auto Scan is enabled for a channel, the radio shall automatically enter scan mode when it
is switched to the channel.
You can exit scan mode through the following three methods:
1. Key operation
Press the programmed [Scan]
key to exit scan mode.
2. Auto
The radio automatically exits from scan mode when it is switched to another channel.
3. Turn the radio off.
z
Talk Back
You can respond to any calls received during the scan process by pressing the [PTT].
z
Priority Channel Scan
Enable you to constantly monitor & keep an update on the activities on the most commonly used
channel so that messages will not be missed. Check with your dealer for details.
When scanning remains on a non-priority channel, the radio continues to monitor activities on
the priority channel, and jumps to the priority channel if activity is detected.
