NOTE:
Users can only enable features that have
been purchased. Features that are not part of the
original truck configuration may be purchased via
the service department.
The available features for the hydraulic controller
software are enabled by a separately downloadable
read-only parameter file that is specific to the truck
serial number. The version number of the current
read-only parameter file is displayed below the
truck serial number. See Figure 10.
See the chapter Download Controller Software
for more information.
The following optional features are listed at the top
of the Installed Features screen. They can be adjus-
ted at dealer level only:
• High Temperature Protection
• Traction Speed Limiter - Container Position
(for G117 only)
• Adjustable Loaded Vehicle Speed Reduction
(for B917 only)
The standard features are listed below the optional
features. Dealers can see what standard features
are active/inactive but they need to ask the service
department to change the settings. The standard
installed features whose settings require a change
from the service department are:
• Cold Temperature Protection
• Automatic Throttle Up
• Hip/Eco eLo Operating Mode
• Drive Over Lift
Dealers must send a P1T-file to the service depart-
ment in order to have settings changed. The service
technician will then change the settings and send
the adjusted P1T-file back to the dealer.
The following standard feature is adjustable at
dealer/customer level:
• Traction Speed Limiter - Loaded
By clicking on the icon for a standard/optional fea-
ture, an accompanying subscreen is displayed. If a
feature screen is accessed at the dealer/service de-
partment level, the values displayed will be read-
only.
1900 SRM 1561
General Functions of the Interface
19