Hyster CHALLENGER H135XL, Руководство по обслуживанию и ремонту

Страница: 16 / 22

Safety Labels 100 SRM 322
Safety Labels
WARNING
Safety labels are installed on the lift truck to
give information about operation and possible
hazards. It is important that all safety labels
are installed on the lift truck and can be read.
DO NOT add to or modify the lift truck. Any
change to the lift truck, the tires, or its equip-
ment can change the lifting capacity. The lift
truck must be rated as equipped and the name-
plate must show the new capacity rating. Con-
tact your dealer for Hyster lift trucks for a re-
placement nameplate.
Cleaning solvents can be flammable and toxic
and cause skin irritation. When using cleaning
solvents, always follow the recommendations
of the manufacturer.
If a label must be replaced, use the following proce-
dure to install a new label:
1. Make sure the surface is dry and has no oil or
grease. Do not use solvent on new paint. Clean
the surface of old paint with a cleaning solvent.
2. Remove the paper from the back of the label. Do
not touch the adhesive surface.
3. Carefully hold the decal in the correct position
above the surface. See Figure 6. The label cannot
be moved after it touches the surface. Put the
label on the surface. Make sure all air is removed
from under the label and the corners and edges
are tight.
10