Hyster C476, Руководство по обслуживанию и ремонту

Страница: 22 / 26

SOFTWARE VERSIONS
Displays truck software version. This truck auto-
matically coordinates the software of all nodes. One
software version number is used to indicate the to-
tal truck software.
Table 9. Software Versions
SOFTWARE VERSIONS
Press
→
Button
V1
TRUCK
ERROR LOG
The Error Log menu keeps record of errors as they
occur. Up to 16 errors (E1 - E16) are stored with
the most recent error listed first. The code number,
occurrence, and hour meter time are displayed for
the last event. See Table 10. Scroll through the In-
formation menu using the UP (#1) and DOWN (#3)
buttons and press the RIGHT (#2) button to enter
the desired selection. Press the LEFT (#4) button to
return to the previous menu.
(E1) Error Log 1
Error 1 (E1) represents the most recent error that
has occurred. This selection shows how many times
this error occurred. Up to 16 errors can be stored
thus showing errors E1 - E16.
Error 1.1 (E1.1)
Error 1.1 (E1.1) shows the alarm code for the error.
Error 1.2 (E1.2)
Error 1.2 (E1.2) shows the key volts and the battery
state of charge (BSOC) at the time the error occur-
red.
Error 1.3 (E1.3)
Error 1.3 (E1.3) shows the status of the CANbus
system at the time the error occurred.
Error 1.4 (E1.4)
Error 1.4 (E1.4) shows the T = Traction and H =
(Hydraulic) function at the time the error occurred.
'0' = OFF
'1' = ON
Bits are displayed from right to left. The first bit
error will display as the last digit while the last bit
error is displayed as the first digit.
Traction errors will be displayed as five digit codes,
utilizing a '1' or '0' in the appropriate bit location.
For example, an error that occured when using the
horn will be represented with TFUNC: 01000 and
an error that occured when traveling traction for-
ward will be displayed as TFUNC: 00001.
Hydraulic errors will be displayed as eight digit co-
des, utilizing a '1' or '0' in th appropriate bit loca-
tion. An example of an error that occurred when
lifting would be HFUNC:00000001 for Lift fault.
1.
T = Traction Function
• bit 0 TRACTION FORWARD
• bit 1 TRACTION REVERSE
• bit 2 STEER
• bit 3 HORN
• bit 4 WIRE GUIDED
2.
H = Hydraulic
• bit 0 LIFT
• bit 1 LOWER
• bit 2 TILT UP
• bit 3 TILT DOWN
• bit 4 SIDE SHIFT RIGHT
• bit 5 SIDE SHIFT LEFT
• bit 6 4TH IN
• bit 7 4TH OUT
Service-Level Menu 2200 SRM 1631
14