4. Lifting
5. Reverse travel OR lifting
6. Forward travel OR lifting
7. Forward OR reverse travel OR lifting
8. Lowering
9. Reverse travel OR lowering
10. Forward travel OR lowering
11. Forward OR reverse travel OR lowering
12. Lifting OR lowering
13. Reverse travel OR lifting / lowering
14. Forward travel OR lifting OR lowering
15. Forward OR reverse travel OR lift OR lower
16. Continuous
S12 Checklist
Use this parameter to ENABLE or DISABLE oper-
ator checklist function. If set to ENABLE, the oper-
ator is prompted to answer questions of an inspec-
tion checklist every time the key is turned ON. If
set to DISABLE, the checklist will not be required.
S13 Maint Reminder
Use this parameter to ENABLE or DISABLE the
service reminder. If set to ENABLE, a message will
appear on the display to service the lift truck, when
a preset hour meter reading is reached. If truck is
not serviced within 20 hours after the reminder,
traction speed is limited to 50%. Enter the hour
meter reading when the next lift truck service is re-
quired, between "1" and "99,999". A setting of “0”
will disable the feature.
S14 Restore Default
Use this parameter to reset all parameters to their
original factory default values and settings. Select
YES to restore all defaults. Select NO to retain ex-
isting values.
S15 Truck Lockout
Use this parameter to ENABLE or DISABLE all
lift truck functions. This is used when the lift truck
must be removed from service for repair. If set to
ENABLE, all lift truck functions will be disabled. If
set to DISABLE, all lift truck functions will be re-
stored.
S61 Extended Shift
Use this parameter to ENABLE or DISABLE the
extended Shift parameters.
S63 Walk Speed Accel
This parameter allows the user to adjust the rate of
tilt speed deceleration. The setting range is from 1
to 9. Setting this parameter to "9" will result in
maximum walk speed accel. Setting this parameter
to "1" will result in minimum walk speed accel.
S64 Walk Speed Decel
This parameter allows the user to adjust the rate of
tilt speed deceleration. The setting range is from 1
to 9. Setting this parameter to "9" will result in
maximum walk speed decel. Setting this parameter
to "1" will result in minimum walk speed decel.
S65 Pick Accel
This parameter allows the user to adjust the rate of
tilt speed deceleration. The setting range is from 1
to 9. Setting this parameter to "9" will result in
maximum pick accel. Setting this parameter to "1"
will result in minimum pick accel.
S66 Pick Decel
This parameter allows the user to adjust the rate of
tilt speed deceleration. The setting range is from 1
to 9. Setting this parameter to "9" will result in
maximum pick decel. Setting this parameter to "1"
will result in minimum pick decel.
S67 Min Steer Assist F
This parameter allows the user to adjust the rate of
tilt speed deceleration. The setting range is from 1
to 9. Setting this parameter to "9" will result in
maximum speed assist. Setting this parameter to
"1" will result in minimum steer assist.
S68 Min Steer Assist R
This parameter allows the user to adjust the rate of
tilt speed deceleration. The setting range is from 1
to 9. Setting this parameter to "9" will result in
maximum steer assist. Setting this parameter to
"1" will result in minimum steer assist.
2200 SRM 1631
Service-Level Menu
13
