DASH DISPLAY MENU OPERATION
The CCS software is accessible through the on
board dash display. All user controlled truck oper-
ating functions can be set using the CCS menu
structure.
NODES
Within the menu structure, you may encounter the
term “Node”. The lift truck software uses nodes to
identify the various control devices used within the
lift truck. The following node designations are used
in this manual:
Node 10 - Display
Node 32 - Combination Controller
Node 60 - Control Handle
The nodes are connected and communicate with
each other through the CANbus communication
system.
MENU STRUCTURE
The base menu is structured to provide access to
the following individual menus. Some of the menu
items are password protected, meaning you can
only access those menu items allowed under your
individual password rights. See Table 1:
Use the UP (#1) and DOWN (#3) buttons to navi-
gate to the menu item allowed for your password
level. Use the LEFT (#4) and RIGHT (#2) buttons
to move within the selected menu. Use the CEN-
TER (#5) button to confirm your selections.
Table 1. Password Structure
Menu Item
Password Level
Operator
Supervisor
Technician
Hour Meters
X
X
X
Performance
X
X
Operator Passwords
X
X
Operator Logs
X
X
Information
X
X
X
Settings
X
Software Versions
X
X
Error Logs
X
Diagnostics
X
Calibrate
X
2200 SRM 1631
Menu Navigation
3
