LCD Screen
The LCD screen displays the following when the
key is in the ON position:
1.
Battery Charge Indicator
2.
Hourmeter (Hours)
3.
Throttle Command
4.
Actual Speed
5.
Run Direction
6.
Performance Mode
DASH DISPLAY MENU ACCESS
To access the dash display menu system:
1.
Turn the key or keyless switch to the ON
position.
2.
Depress the center button (#5) on the display
two times.
3.
The Enter Password screen will now appear
on the LCD. Enter your five-digit Service
Technician password. The factory default
service-level password is 55555.
To enter your password at the ENTER
PASSWORD screen, enter the appropriate digit in
the highlighted area of the display. Use the
appropriate button on the display keypad to enter
any digit between 1 and 5. The cursor will
automatically move to the next position after a
number has been entered. Repeat until all five
digits of your password have been entered. Upon
successful entry of your service-level password, the
display will enter the Service Menu system. If an
incorrect password is entered, the display will ask
for the password to be entered again. The menu
system can be exited at any time by pressing the
LEFT (#4) button repeatedly.
Menu Navigation
NOTE:
The display menus are revolving and will
repeat when you scroll beyond the last menu item.
Upon successful entry of your service-level pass-
word, the service menu screen will appear on the
dash display LCD screen. Menu navigation is ac-
complished by using the display buttons. From in-
side the menu, the buttons function as follows:
1.
UP
- Scroll up within a menu, or increase the
value of a setting when making a parameter
adjustment.
2.
RIGHT
- Scroll right within a menu. Will move you
into the next submenu or activate the high-
lighted parameter to allow parameter value
adjustments.
3.
DOWN
- Scroll down within a menu, or decrease the
value of a setting when making a parameter
adjustment.
4.
LEFT
- Scroll left within a menu. Will move you to
the previous menu when depressed. Press re-
peatedly to exit the menu system.
5.
ENTER
- Press to accept parameter value adjust-
ments. Press twice to access the Enter Pass-
word screen.
General
2200 SRM 1631
2
