Hyster B218, Периодическое техническое обслуживание

Страница: 10 / 26

Maintenance Schedule 8000 SRM 1009
2. Position blocks under both sides of the truck in
the area of the battery compartment.
3. Loosen and remove buckle and strap from around
battery.
4. Lift the battery out of the truck. DO NOT allow
the battery to shift from side to side. Make sure
the battery cables have clearance.
5. Before installing a new battery, make sure the
battery is the correct size and weight for the lift
truck. Make sure the battery has clearance for
installation. Check that the battery connector
can be attached to the lift truck connector with-
out pulling during lifting and lowering opera-
tions. DO NOT damage the battery cables dur-
ing installation. Install the battery.
6. Replace buckle and strap and tighten to prevent
the battery from moving.
7. Remove the blocks from under the truck.
8. Connect the battery. Test the operation of the
motorized hand truck before returning the truck
to service.
Maintenance Schedule
CHECKS AND INSPECTION PROCEDURES
WARNING
DO NOT make repairs or adjustments to the
lift truck unless you been properly trained and
specifically authorized to do so. Repairs and
adjustments that are not performed correctly
can create dangerous operating conditions.
DO NOT operate a lift truck that needs repairs.
Report the need for repairs to your supervisor
immediately. If repair is necessary, put a DO
NOT OPERATE tag on the control handle. Re-
move the key from the key switch.
CAUTION
Disposal of lubricants and fluids must meet lo-
cal environmental regulations.
Trucks operating in non-standard or severe
applications may require special optional envi-
ronmental packages, additional maintenance
procedures, more frequent service intervals
and/or special lubricants.
The Recommended Schedule of Maintenance is lo-
cated in this section. The Maintenance Schedule has
the time intervals for inspection, lubrication, and
maintenance. The Maintenance Schedule is based
on normal operations. Severe or unusual operating
conditions will require a reduction in the recom-
mended time periods in the Maintenance Schedule.
Your Hyster
®
dealer has the facilities and trained
personnel to do complete lift truck maintenance.
A complete program of inspection, lubrication, and
maintenance will help your lift truck perform ef-
ficiently and operate over a longer period of time.
Service manuals are available from your Hyster
dealer to help users who do their own maintenance.
Put the lift truck on a level surface. Lower the forks,
turn the key switch to the OFF position and discon-
nect the battery. Remove the hood. If repair is re-
quired, attach a DO NOT OPERATE tag to the con-
trol handle. DO NOT operate a lift truck until all
repairs have been performed.
6