816 LA Actuator
INSTALLATION REFERENCE MANUAL
10
1. Place gate in:
a) OPEN position for PULL-TO-OPEN configuration (IMAGE 4-1).
b) CLOSED position for PUSH-TO-OPEN configurations ( IMAGE 4-2).
2. With actuator arm fully retracted, rotate entire actuator on the pivot arm around until the gate
bracket attached to the actuator is positioned on a supporting structure of gate.
3. Mark position of gate bracket on gate or clamp into position.
4
POSITION GATE BRACKET ON GATE
NOTES:
Do not attach gate bracket to gate pickets. Attach only to structural supports.
If unsure of exact bracket location, tack weld or clamp until gate can be tested.
IMAGE 4-2:
GATE BRACKET LOCATION
(
PUSH-TO-OPEN
)
IMAGE 4-1:
GATE BRACKET LOCATION
(
PULL-TO-OPEN
)
ACTUATOR
(RETRACTED)
ACTUATOR
(RETRACTED)
PIVOT ARM
PIVOT ARM
W
ALL
WALL
GATE BRACKET
LOCATION
GATE BRACKET
LOCATION
GATE
OPEN
GATE
CLOSED
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]
